Showing first {{hits.length}} results of {{hits_total}} for {{searchQueryText}}{{hits.length}} results for {{searchQueryText}}

No hay resultados de búsqueda

Exams can be easily created in LaTeX by means of the class exam.cls. This class makes it straightforward to typeset questions, and it sets a 1in margin in all paper sizes and provides special commands to write and compute grades. This article explains how to edit with exam.cls.

Contents

[edit] Introduction

Let's see a simple working example of the exam class:

\documentclass{exam}
\usepackage[utf8]{inputenc}
 
\begin{document}
 
\begin{center}
\fbox{\fbox{\parbox{5.5in}{\centering
Answer the questions in the spaces provided. If you run out of room
for an answer, continue on the back of the page.}}}
\end{center}
 
\vspace{5mm}
 
\makebox[\textwidth]{Name and section:\enspace\hrulefill}
 
\vspace{5mm}
 
\makebox[\textwidth]{Instructor’s name:\enspace\hrulefill}
 
\begin{questions}
\question Is it true that \(x^n + y^n = z^n\) if \(x,y,z\) and \(n\) are
positive integers?. Explain.
 
\question Prove that the real part of all non-trivial zeros of the function
\(\zeta(z)\) is \(\frac{1}{2}\)
 
\question Compute \[\int_{0}^{\infty} \frac{\sin(x)}{x}\]
\end{questions}

ExamEx1.png

To use the exam class you must put the line

\documentclass{exam}

on top of your .tex file. This will enable the package's exam-related commands, and set the page format to allow margins for corrections.

The syntax of the questions environment is very similar to that of the itemize and enumerate environments. Each question is typed by putting the command \question before it.

The other commands in this example are not specific to the exam class, but may be useful to create a quick header for your exam.

  Open an example of the exam class in Overleaf

[edit] Creating new questions

In the previous section, a basic example showing how to create question was presented. Questions can be further customized, and this section explains how.

[edit] spacing

If the students are required to answer the exam in the space provided, that space can be manually set or evenly distributed. See the example below:

\begin{questions}
 
\question Is it true that \(x^n + y^n = z^n\) if \(x,y,z\) and \(n\) are positive integers?. Explain.
\vspace{\stretch{1}}
 
\question Prove that the real part of all non-trivial zeros of the function \(\zeta(z)\) is \(\frac{1}{2}\)
\vspace{\stretch{1}}
 
\question Compute \[\int_{0}^{\infty} \frac{\sin(x)}{x}\]
\vspace{\stretch{1}}
 
\end{questions}
\clearpage

ExamEx2.png

In this example the command \vspace{\stretch{1}} after each question equally distributes the available space.

The command \clearpage inserts a page break point to continue typing questions in a new page.

If you want to manually assign the space to each question, use the command \vspace{} and in between the braces write the units of space you need. For instance, \vspace{1in} inserts a 1-inch vertical space. Check the documentation about lenghts in LaTeX for a list of available units.

  Open an example of the exam class in Overleaf

[edit] subparts

If your questions have several parts focused on some subtopics you can use the environments parts, subparts, subsubparts and the corresponding commands \part, \subpart and \subsubpart. See the next example:

\begin{questions}
\question Given the equation \(x^n + y^n = z^n\) for \(x,y,z\) and \(n\) positive
integers. 
\begin{parts}
\part For what values of $n$ is the statement in the previous question true?
\vspace{\stretch{1}}
 
\part For $n=2$ there's a theorem with a special name. What's that name?
\vspace{\stretch{1}}
 
 
\part What famous mathematician had an elegant proof for this theorem but
there was not enough space in the margin to write it down?
\vspace{\stretch{1}}
 
\begin{subparts}
\subpart Who actually proved the theorem?
\vspace{\stretch{1}}
\subpart How long did actually take to solve this problem?
\vspace{\stretch{1}}
\end{subparts}
 
\end{parts}
 
\question Prove that the real part of all non-trivial zeros of the function 
\(\zeta(z)\) is \(\frac{1}{2}\)
...
 
\end{questions}

ExamEx3.png

The environments parts and subparts provide question-like nested lists. Jut like in questions you can set manually the vertical spacing.

  Open an example of the exam class in Overleaf

[edit] Multiple choice questions

There are four environments to create multiple choice questions.

\question Which of these famous physicists invented time?
 
\begin{oneparchoices}
 \choice Stephen Hawking 
 \choice Albert Einstein
 \choice Emmy Noether
 \choice This makes no sense
\end{oneparchoices}
 
\question Which of these famous physicists published a paper on Brownian Motion?
 
\begin{checkboxes}
 \choice Stephen Hawking 
 \choice Albert Einstein
 \choice Emmy Noether
 \choice I don't know
\end{checkboxes}

ExamEx9.png

In this example, two different environments are used to list the possible choices for multiple-choice questions.

  • The environment oneparchoices labels the choices with upper case letters and prints them horizontally. If you want the choices to be printed in a list-like format, the environment choices is the right choice.
  • The environment checkboxes prints check boxes before each choice. If you need the choices to be printed horizontally use the environment oneparcheckboxes instead.

  Open an example of the exam class in Overleaf

[edit] Grading

Another important feature of the exam class is that it provides commands to make grading the exams easier.

[edit] points in each question

You can add a parameter to each \question or \part to print the number of points you attain by correctly answering it

\begin{questions}
\question Given the equation \(x^n + y^n = z^n\) for \(x,y,z\) and \(n\) positive
integers. 
\begin{parts}
\part[10] For what values of $n$ is the statement in the previous question true?
\vspace{\stretch{1}}
 
\part[10] For $n=2$ there's a theorem with a special name. What's that name?
\vspace{\stretch{1}}
 
 
\part[10] What famous mathematician had an elegant proof for this theorem but there was
not enough space in the margin to write it down?
\vspace{\stretch{1}}
 
\end{parts}
 
\question[20] Compute \[\int_{0}^{\infty} \frac{\sin(x)}{x}\]
 
\vspace{\stretch{1}}
\end{questions}

ExamEx4.png

The additional parameter inside brackets after a question or a part represents the number of points assigned to it. You can change the appearance and the place where the points are printed, see the reference guide for additional commands.

  Open an example of the exam class in Overleaf

[edit] counting points and half points

Sometimes it's convenient to include half points as value for parts of a questions. You can do this and then print then the value of the whole question. See the example below:

\documentclass[addpoints]{exam}
\usepackage[utf8]{inputenc}
 
\begin{document}
\begin{questions}
\question Given the equation \(x^n + y^n = z^n\) for \(x,y,z\) and \(n\) positive
integers. 
\begin{parts}
\part[5] For what values of $n$ is the statement in the previous question true?
\vspace{\stretch{1}}
 
\part[2 \half] For $n=2$ there's a theorem with a special name. What's that name?
\vspace{\stretch{1}}
 
 
\part[2 \half] What famous mathematician had an elegant proof for this theorem but there was
not enough space in the margin to write it down?
\vspace{\stretch{1}}
 
\end{parts}
 
\droptotalpoints
 
\question[20]...
\end{questions}

ExamEx5.png

The command \half adds half points to a question. The command \droptotalpoints prints the total number of points for the last question. For this last command to work you must add the option [addpoints] to the document class statement.

  Open an example of the exam class in Overleaf

[edit] bonus points

It is possible to add bonus questions, this extra points will later show up in the grading table. Adding bonus questions and parts is actually as simple as creating regular questions and parts.

\begin{questions}
 
\question Given the equation \(x^n + y^n = z^n\) for \(x,y,z\) and \(n\) positive
integers. 
\begin{parts}
\part[5] For what values of $n$ is the statement in the previous question true?
\vspace{\stretch{1}}
 
\part[2 \half] For $n=2$ there's a theorem with a special name. What's that name?
\vspace{\stretch{1}}
 
 
\bonuspart[2 \half] What famous mathematician had an elegant proof for this theorem but there was
not enough space in the margin to write it down?
\vspace{\stretch{1}}
 
\end{parts}
 
\droptotalpoints
 
\question[20] Compute \[\int_{0}^{\infty} \frac{\sin(x)}{x}\]
 
\vspace{\stretch{1}}
 
\bonusquestion[30] Prove that the real part of all non-trivial zeros of the function 
\(\zeta(z)\) is \(\frac{1}{2}\)
\vspace{\stretch{1}}
 
\end{questions}

ExamEx6.png

The commands \bonusquestion and \bonuspart print "(bonus)" next to the point value of the question.

  Open an example of the exam class in Overleaf

[edit] grading table

A table that show the points of each question can be printed with a special command.

\begin{center}
\combinedgradetable[h][questions]
\end{center}

ExamEx7.png

There are three commands to print a table of grades:

\gradetable
Prints a table with the grades corresponding to regular questions. If there are bonus questions those are not included.
\bonusgradetable
Prints a table with the grades corresponding to the bonus questions only
\combinedgradetable
Prints a table with both, regular and bonus questions.

These commands take two extra parameters, each parameter inside brackets.

  • The first one can be [h] for a horizontal table or [v] for a vertical table.
  • The second one sets how the table is indexed: [questions] to index the points by question and [pages] to list the points by page number.

  Open an example of the exam class in Overleaf

[edit] Other languages

There is no support for other languages than English in the exam class. Nevertheless, it's easy to translate the default words for those in your local language. The next snippet shows how to translate the example presented in the previous sections to Spanish.

ss[addpoints]{exam}
\usepackage[utf8]{inputenc}
\usepackage[spanish]{babel}
 
\pointpoints{punto}{puntos}
\bonuspointpoints{punto extra}{puntos extra}
 
\totalformat{Pregunta \thequestion: \totalpoints puntos}
 
\chqword{Pregunta}
\chpgword{Página}
\chpword{Puntos}
\chbpword{Puntos extra}
\chsword{Puntos obtenidos}
\chtword{Total}
 
...

ExamEx8.png


The rest of the document would be exactly the same shown in previous examples. The commands typed here change the default words in the exam class.

\pointpoints{punto}{puntos}
Changes the words point and points for the words punto and puntos in regular questions and parts.
\bonuspointpoints{punto extra}{puntos extra}
Writes punto extra and puntos extras instead of bonus point and bonus points in bonus questions and bonus parts.
\totalformat{Pregunta \thequestion: \totalpoints puntos}
Changes the text printed by \droptotalpoints. In the example it prints Pregunta 1: 7 1/2 puntos.
\chqword{Pregunta}
Changes the word Question for the word Pregunta in the grading table table. The rest of the commands change the other words in that table, chpgword for Page, \chpword for Points, \chbpword for Bonus points, \chsword for Score and \chtword for Total. These commands may change depending on the type of table your are creating, see the reference guide for the commands needed in other tables.

  Open an example of the exam class in Overleaf

[edit] Reference guide

Placing and formatting the points mark for questions

These commands can be typed in the preamble to change the format of the whole document or right before a question to change the format from that question down to the next formatting command or the end of the document.

  • \poinstmargin. The point values are printed in the left margin. Use \nopointsmargin to revert this command to the default format.
  • \pointsmarginright. The point values are printed in the right margin. The command \nopoinstmarginright will revert to the normal behaviour.
  • \bracketedpoints. Uses brackets instead of parentheses around the point values.
  • \boxedpoints. Draws a box around the point values.


Changing default names in Grade Tables

The commands depend on the format and the information displayed on the table. The h and v within each command mean horizontal or vertical orientation. If the command is preceded by a b means it changes the format in a bonus table, if the command is preceded by a c means it works on combined tables. For instance, to change the word "Score" in a vertical oriented bonus table for the words "Points Awarded" you should use \bvsword{Points Awarded}.

Below a table with the default values is shown.

horizontal vertical
grades table

\hqword{Question:}

\hpgword{Page:}

\hpword{Points:}

\hsword{Score:}

\htword{Total}

\vqword{Question}

\vpgword{Page}

\vpword{Points}

\vsword{Score}

\vtword{Total:}

bonus points table

\bhqword{Question:}

\bhpgword{Page:}

\bhpword{Bonus Points:}

\bhsword{Score:}

\bhtword{Total}

\bvqword{Question}

\bvpgword{Page}

\bvpword{Bonus Points}

\bvsword{Score}

\bvtword{Total:}

combined table

\chqword{Question:}

\chpgword{Page:}

\chpword{Points:}

\chbpword{Bonus Points:}

\chsword{Score:}

\chtword{Total}

\cvqword{Question}

\cvpgword{Page}

\cvpword{Points}

\cvbpword{Bonus Points}

\cvsword{Score}

\cvtword{Total:}

[edit] Further reading

For more information see:

[edit] Overleaf guides

[edit] LaTeX Basics

[edit] Mathematics

[edit] Figures and tables

[edit] References and Citations

[edit] Languages

[edit] Document structure

[edit] Formatting

[edit] Fonts

[edit] Presentations

[edit] Commands

[edit] Field specific

[edit] Class files

[edit] Advanced TeX/LaTeX