\documentclass[urlsf]{utem}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This is MyThesis.tex, as on October 10, 2014.
% It was originally designed and developed Lim Lian Tze of USM.
% A major modification was made by Nor Hafeizah Hassan and Gede Pramudya. Later by A.Sadhiqin M.Isira
% This is the "main" file for the thesis, formatted according to the Guide to the
% Preparation, Submission and Examination of Theses, published by PPS UTeM.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Example of packages used
\usepackage{epstopdf}
\usepackage{lipsum}
\usepackage{setspace}
\usepackage{tocbibind}
\usepackage{graphicx}
\graphicspath{{images/}}
\usepackage{subfig}
\usepackage{appendix}
%list of abbreviations and symbols
\usepackage[acronym,smallcaps,nonumberlist]{glossaries}
\newglossarystyle{mylong}{%
\setglossarystyle{long}%
\renewenvironment{theglossary}%
{\begin{longtable}[l]{p{2cm}p{\hsize}}}% <-- change the value here
{\end{longtable}}}
%for list of abbreviations
\newacronym{ny}{NY}{New York}
\newacronym{la}{LA}{Los Angeles}
\newacronym{un}{UN}{United Nations}
\newacronym{utem}{UTeM}{Universiti Teknikal Malaysia Melaka}
\newacronym{fkekk}{FKEKK}{Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer}
\newacronym{mas}{MAS}{Multi-agents System}
\newacronym{kba}{KBA}{Kedudukan Baik Anugerah}
\newacronym{iot}{iOT}{Internet of Things}
% nomenclature/symbols for List of Symbols
\newglossaryentry{angelsperarea}{
name = $a$ ,
description = The number of angels per unit area,
}
\newglossaryentry{numofangels}{
name = $N$ ,
description = The number of angels per needle point
}
\newglossaryentry{areaofneedle}{
name = $A$ ,
description = The area of the needle point
}
\newglossaryentry{laplacianmatrix}{
name = $\mathcal{L}$ ,
description = The Laplacian matrix
}
\makeglossaries
% Particulars about your thesis are here
% Your Name
\author{Author's Name}
% English title of your thesis
\title{Title of Thesis}
% Malay title of your thesis
\titlems{Title of Thesis}
% Year submitted
\submityear{Year}
% Month submitted
\submitmonth{Month}
% Choose only 1 degree type
\degreetype{Type of Degree}
%\degreetype{Master of Engineering (Electronics)}
% Options for generating hyperlinks when using pdfLaTeX - with link, color is nil, underline is nil
% Also a TOC without dotted lines
\ifpdf
\makeatletter
\usepackage[hidelinks,pdftex,plainpages=false,hypertexnames=false,bookmarksnumbered,pdfpagelabels,%
pdfauthor={\@author},pdftitle={\@title}]{hyperref}
\renewcommand*{\cftdotsep}{\cftnodots}
\makeatother
\else
\usepackage[dvips,plainpages=false,bookmarksnumbered,breaklinks=true]{hyperref}
\fi
% As we have loaded the natbib package, you can customise the citation style to
% some extent. The following line specifies some standard punctuations:
%
% \bibpunct{#1}{#2}{#3}{#4}{#5}{#6}
% #1: open punctuation (a round bracket here)
% #2: close punctuation (a round bracket here)
% #3: punctuation separating multiple authors (a semi-colon here)
% #4: n - citation using numerical system
% s - numeric superscript system
% any other letter - author-year system
% #5: punctuation separating author name(s) from year
% #6: punctuation separating years for multiple citations
% with same author(s)
%
% The default citation that I used here is therefore of the form
% (Wilks and Stevenson, 1999; Somers, 2000)
%
% You may change any of the 6 parameters if you prefer a different citation style.
% Also see the natbib documentation.
%\bibpunct{(}{)}{;}{a}{,}{,}
%\renewcommand{\cftchapafterpnum}{\vspace{\cftbeforechapskip}}
\renewcommand\thesubfigure{\alph{subfigure}}
\newcommand{\subfigureautorefname}{\figureautorefname}
\newcommand*\thesubfloattable{\themaintable\alph{subfloattable}}
\newenvironment{subtables}{\subtablesbegin}{\subtablesend\global\@ignoretrue}
\begin{document}
\lstset{fontadjust=true}
\frontmatter
\addtocontents{toc}{\protect\raggedright\protect\sloppy}
\addtocontents{toc}{\protect\hfill{\protect\bfseries PAGE}\\}
\addtocontents{lof}{\protect\raggedright\protect\sloppy}
\addtocontents{lof}{\protect{\protect\bfseries FIGURE}\hfill{\protect\bfseries TITLE}\hfill{\protect\bfseries PAGE}\\}
\addtocontents{lot}{\protect\raggedright\protect\sloppy}
\addtocontents{lot}{\protect{\protect\bfseries TABLE}\hfill{\protect\bfseries TITLE}\hfill{\protect\bfseries PAGE}\\}
\addtocontents{lop}{\protect\raggedright\protect\sloppy}
\addtocontents{lop}{\protect\hfill{\protect\bfseries PAGE}\\}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Inserts the cover page (the hard cover with gold-lettering) and the title page.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\makecover
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Inserts a "Front Matter" bookmark if using pdfLaTeX
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\ifpdf
\pdfbookmark[-1]{Front Matter}{front}
\else\fi
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% include declaration, approval, dedication, english abstract, Malay abstrak, and acknowledgement
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\setcounter{page}{0} %not included at page numbering
\include{chapters/declaration}
\setcounter{page}{0}
\include{chapters/approval}
\setcounter{page}{0}
\include{chapters/dedication}
\include{chapters/abstract}
\newpage
\input{chapters/abstrak}
% TOC,LOF,LOT
\renewcommand{\contentsname}{TABLE OF CONTENTS}
\newcommand\tocheading{\par\bigskip\MakeUppercase{\chaptername}\hfill \MakeUppercase{Page}\par}
\renewcommand{\listfigurename}{LIST OF FIGURES}
\renewcommand{\listtablename}{LIST OF TABLES}
%\singlespacing
\begin{singlespace}\label{list:toc}
\tableofcontents \clearpage
\listoftables \clearpage
\listoffigures \clearpage
\end{singlespace}
%\singlespacing
\include{chapters/publications}
\include{chapters/abbrvsymbols}
\include{chapters/appendiceslist}
%page numbering starts from here
\include{chapters/acknowledgements}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% List of abreviation, accronyms, symbols, and own-publications
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\include{loa}
%---------------------------------------------------------------
%Include the List of (own) Publications. Each item can not be cited, according
%to the convention addopted by UTeM and talk between me and TD PPS. So it
%should be created manually (at the moment by using 'dumb' idea)
% --------------------------------------------------------------
\begin{singlespace}
%\include{lop} %under construction
%\include{loptrial}
\end{singlespace}
% Paragraph spacing
\setlength\parskip{18pt}
% paragraph indentation
\setlength\parindent{1.22cm}
\addtocontents{toc}{\protect\setlength{\protect\cftbeforechapskip}{5mm}}
%\addtocontents{toc}{\protect\cftpagenumbersoff{chap}}
\mainmatter
\ifpdf
\pdfbookmark[-1]{Main Chapters}{main}
\else\fi
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% All Chapters
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newpage
\onehalfspacing
\include{chapters/1-chap-intro}
\include{chapters/2-chap-review}
\include{chapters/3-chap-method}
\include{chapters/3-chap-result-analysis}
\include{chapters/4-chap-discussion}
\include{chapters/5-chap-conc-fw}
%-----------------------------------------------------------------
% include the bibliography which is titled as "References"
%-----------------------------------------------------------------
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% You can choose from several bibliography styles. It is agreed to use Harvard.
% One of the Harvard styles which is close the the Guide is dcu
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\bibliographystyle{IEEEtran}
%\bibliographystyle{dcu}
%\bibliographystyle{unsrtnat}
\addtocontents{toc}{\protect\cftpagenumberson{chap}}
\renewcommand{\bibname}{\textbf{REFERENCES}}
\bibliography{mybib}
\include{chapters/appendices}
\end{document}
