Thesis Data Science LM-DATA UNICT
Author
Giovanni Spadaro
Last Updated
hace 18 días
License
Other (as stated in the work)
Abstract
Official thesis template for the Data Science master degree course at University of Catania.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Masters/Doctoral Thesis
% LaTeX Template
% Version 2.5 (27/8/17)
%
% This template was downloaded from:
% http://www.LaTeXTemplates.com
%
% Version 2.x major modifications by:
% Vel (vel@latextemplates.com)
%
% This template is based on a template by:
% Steve Gunn (http://users.ecs.soton.ac.uk/srg/softwaretools/document/templates/)
% Sunil Patel (http://www.sunilpatel.co.uk/thesis-template/)
%
% Template license:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/)
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This thesis template is an adaptation of the template mentioned above. It has been created by Giovanni Spadaro and it is available on GitHub (https://github.com/Giovo17/thesis-template-unict-lm-data).
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass[
11pt, % The default document font size, options: 10pt, 11pt, 12pt
%oneside, % Two side (alternating margins) for binding by default, uncomment to switch to one side
english, % ngerman for German
singlespacing, % Single line spacing, alternatives: onehalfspacing or doublespacing
%draft, % Uncomment to enable draft mode (no pictures, no links, overfull hboxes indicated)
%nolistspacing, % If the document is onehalfspacing or doublespacing, uncomment this to set spacing in lists to single
%liststotoc, % Uncomment to add the list of figures/tables/etc to the table of contents
%toctotoc, % Uncomment to add the main table of contents to the table of contents
%parskip, % Uncomment to add space between paragraphs
%nohyperref, % Uncomment to not load the hyperref package
headsepline, % Uncomment to get a line under the header
%chapterinoneline, % Uncomment to place the chapter title next to the number on one line
%consistentlayout, % Uncomment to change the layout of the declaration, abstract and acknowledgements pages to match the default layout
]{MastersDoctoralThesis} % The class file specifying the document structure
% These are the main packages you could use for your thesis. You can remove the unused ones.
\usepackage[utf8]{inputenc} % Required for inputting international characters
\usepackage[T1]{fontenc} % Output font encoding for international characters
\usepackage{amsmath}
\usepackage{verbatim}
\usepackage{amsfonts}
\usepackage{siunitx}
\usepackage{subfloat}
\usepackage{changepage}
\usepackage{float}
\usepackage{subfig}
\usepackage{textcomp}
\usepackage{enumitem}
\usepackage{hyperref}
\usepackage{lmodern} % Use the Palatino font by default
\usepackage{eso-pic}
\usepackage{setspace}
\usepackage[nottoc]{tocbibind}
\usepackage{diagbox}
\usepackage{nicefrac}
\usepackage[autostyle=true]{csquotes} % Required to generate language-dependent quotes in the bibliography
\usepackage{amsthm}
% O in alternativa style = authoryear
\usepackage[backend=bibtex,style=ieee,natbib=true]{biblatex} % Use the bibtex backend with the authoryear citation style (which resembles APA)
\addbibresource{thesisBibliography.bib} % The filename of the bibliography
% ------- This part defines some new commands, like Theorem, Lemma or the command used for the centering the first image
\theoremstyle{plain}
\newtheorem{thm}{Theorem}[section]
\newtheorem{cor}[thm]{Corollary}
\newtheorem{lem}[thm]{Lemma}
\newtheorem{prop}[thm]{Proposition}
\theoremstyle{definition}
\newtheorem{defn}{Definition}[chapter]
\theoremstyle{remark}
\newtheorem{obs}{Observation}
\newcommand\alcentropagina[1]{\AddToShipoutPicture{%
\AtPageCenter{\makebox(50,0){\includegraphics[width=1.2\textwidth]{#1}}}}}
%----------------------------------------------------------------------------------------
% MARGIN SETTINGS
%----------------------------------------------------------------------------------------
\geometry{
paper=a4paper, % Change to letterpaper for US letter
inner=3.8cm, % Inner margin
outer=3.8cm, % Outer margin
bindingoffset=.5cm, % Binding offset
top=1.5cm, % Top margin
bottom=1.5cm, % Bottom margin
%showframe, % Uncomment to show how the type block is set on the page
}
%----------------------------------------------------------------------------------------
% THESIS INFORMATION
%----------------------------------------------------------------------------------------
\thesistitle{Thesis Title} % Your thesis title, this is used in the title and abstract, print it elsewhere with \ttitle
\supervisor{Dr. James \textsc{Smith}} % Your supervisor's name, this is used in the title page, print it elsewhere with \supname
\cosupervisor{Dr. A B} % Your cosupervisor's name, this is used in the title page, print it elsewhere with \cosupname
\examiner{} % Your examiner's name, this is not currently used anywhere in the template, print it elsewhere with \examname
\degree{Data Science} % Your degree name, this is used in the title page and abstract, print it elsewhere with \degreename
\author{John \textsc{Smith}} % Your name, this is used in the title page and abstract, print it elsewhere with \authorname
\addresses{} % Your address, this is not currently used anywhere in the template, print it elsewhere with \addressname
\subject{Biological Sciences} % Your subject area, this is not currently used anywhere in the template, print it elsewhere with \subjectname
\keywords{} % Keywords for your thesis, this is not currently used anywhere in the template, print it elsewhere with \keywordnames
\university{\href{http://www.unict.it}{Università degli Studi di Catania}} % Your university's name and URL, this is used in the title page and abstract, print it elsewhere with \univname
\departmenta{{
Department of Economics and Business
}}
\departmentb{\href{https://www.dieei.unict.it/}{
Department of Electrical Electronic and Computer Engineering
}}
\departmentc{\href{https://web.dmi.unict.it/}{
Department of Mathematics and Computer Science
}}
% Your department's name and URL, this is used in the title page and abstract, print it elsewhere with \deptname
\group{\href{http://researchgroup.university.com}{Research Group Name}} % Your research group's name and URL, this is not used in the title page, print it elsewhere with \groupname
\faculty{\href{http://faculty.university.com}{Faculty Name}} % Your faculty's name and URL, this is used in the title page and abstract, print it elsewhere with \facname
\AtBeginDocument{
\hypersetup{pdftitle=\ttitle} % Set the PDF's title to your title
\hypersetup{pdfauthor=\authorname} % Set the PDF's author to your name
\hypersetup{pdfkeywords=\keywordnames} % Set the PDF's keywords to your keywords
}
\begin{document}
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
%----------------------------------- FRONTESPIZIO GRANDE ----------------------
\newgeometry{
paper=a4paper, % Change to letterpaper for US letter
inner=3cm, % Inner margin
outer=2.5cm, % Outer margin
bindingoffset=.5cm, % Binding offset
top=3.5cm, % Top margin
bottom=1.5cm, % Bottom margin
}
%%%%%%%%%%%%%%%%%% PRIMA PAGINA %%%%%%%%%%%%%%%%%%
% Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\pagestyle{plain} % Default to the plain heading style until the thesis style is called for the body content
\begin{titlepage}
\begin{center}
\includegraphics[scale=0.27]{Figures/logos/logo_v2.png} % University/department logo - uncomment to place it
%\vspace*{.06\textheight}
%{\color{red!50!black}{\scshape\LARGE \univname \par}\vspace{1.2cm}} % University name
{\scshape\large \deptaname \par}\vspace{0.35cm} % Department 1 name
{\scshape\large \deptbname \par}\vspace{0.35cm} % Department 1 name
{\scshape\large \deptcname \par}\vspace{1cm} % Department 1 name
\textsc{\Large Master's Degree in
\degreename}\\[0.5cm] % Thesis type
\HRule \\[2cm] % Horizontal line
{\huge \bfseries \ttitle\par}\vspace{1cm} % Thesis title
{MASTER DEGREE THESIS}\vspace{1cm} % Thesis
\begin{minipage}[t]{0.4\textwidth}
\begin{flushleft} \large
\emph{Author}\\
\href{}{\authorname} % Author name - remove the \href bracket to remove the link
\end{flushleft}
\end{minipage}
\begin{minipage}[t]{0.4\textwidth}
\begin{flushright} \large
\emph{Supervisor} \\
\href{}{\supname} \\ % Supervisor name - remove the \href bracket to remove the link
\phantom{null}\newline
\emph{Cosupervisor} \\
\href{}{\cosupname}
\end{flushright}
\end{minipage}\\[2cm]
\vfill
%\large \textit{A thesis submitted in fulfillment of the requirements\\ for the degree of \degreename}\\[0.3cm] % University requirement text
%\textit{in the}\\[0.4cm]
%\groupname\\\deptname\\[2cm] % Research group name and department name
\vfill
\HRule \\[1cm] % Horizontal line
{\large ACADEMIC YEAR 2023/2024 \\ Add your graduation date here}\\[4cm] % Date
\vfill
\end{center}
\end{titlepage}
\cleardoublepage
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\begin{titlepage}
\begin{center}
% Logo al centro della pagina
\alcentropagina{Figures/logos/logounict_v2.pdf}
\vspace{21cm}
%
% Autore
\makeatletter
\large\textrm{\authorname}
\makeatother
\vspace{8.85cm}
%
% Titolo
\begin{center}
\makeatletter
\singlespacing\Huge\textsc{\ttitle}
\makeatother
\end{center}%
\vspace{0.4cm}
%
% Tipo di Tesi
\makeatletter
\large\textit{Master's Degree Thesis}
\makeatother
\vfill
%
\large UNIVERSITY OF CATANIA\\
\vspace{1cm}
%
% Data Esame di Laurea
\makeatletter
\large\textrm{July 2024} % Add month and year of your graduation
\makeatother
\end{center}
\end{titlepage}
\ClearShipoutPicture
\restoregeometry
\pagestyle{plain} % Default to the plain heading style until the thesis style is called for the body content
%----------------------------------------------------------------------------------------
% QUOTATION PAGE
%----------------------------------------------------------------------------------------
% Remove this page if you do not want to add a quotation reference
\vspace*{0.2\textheight}
\noindent\enquote{\itshape What we know is a drop, what we don't know is an ocean.}\bigbreak
\hfill Isaac Newton
%----------------------------------------------------------------------------------------
% ABSTRACT PAGE
%----------------------------------------------------------------------------------------
%\begin{abstract}
%\addchaptertocentry{\abstractname} % Add the abstract to the table of contents
%The Thesis Abstract is written here (and usually kept to just this page). The page is kept centered vertically so can expand into the blank space above the title too\ldots
%\end{abstract}
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\tableofcontents % Prints the main table of contents
\listoffigures % Prints the list of figures
\listoftables % Prints the list of tables
%----------------------------------------------------------------------------------------
% ABBREVIATIONS
%----------------------------------------------------------------------------------------
\begin{abbreviations}{ll} % Include a list of abbreviations (a table of two columns)
\textbf{LAH} & \textbf{L}ist \textbf{A}bbreviations \textbf{H}ere\\
\textbf{WSF} & \textbf{W}hat (it) \textbf{S}tands \textbf{F}or\\
\end{abbreviations}
%----------------------------------------------------------------------------------------
% PHYSICAL CONSTANTS/OTHER DEFINITIONS
%----------------------------------------------------------------------------------------
\begin{constants}{lr@{${}={}$}l} % The list of physical constants is a three column table
% The \SI{}{} command is provided by the siunitx package, see its documentation for instructions on how to use it
Speed of Light & $c_{0}$ & \SI{2.99792458e8}{\meter\per\second} (exact)\\
%Constant Name & $Symbol$ & $Constant Value$ with units\\
\end{constants}
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
\begin{symbols}{lll} % Include a list of Symbols (a three column table)
$a$ & distance & \si{\meter} \\
$P$ & power & \si{\watt} (\si{\joule\per\second}) \\
%Symbol & Name & Unit \\
\addlinespace % Gap to separate the Roman symbols from the Greek
$\omega$ & angular frequency & \si{\radian} \\
\end{symbols}
%----------------------------------------------------------------------------------------
% DEDICATION
%----------------------------------------------------------------------------------------
% Remove if you do not want to dedicate your work
\dedicatory{For/Dedicated to/To my\ldots}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{thesis} % Return the page headers back to the "thesis" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\include{Chapters/Chapter1}
%\include{Chapters/Chapter2}
%\include{Chapters/Chapter3}
%\include{Chapters/Chapter4}
%\include{Chapters/Chapter5}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - APPENDICES
%----------------------------------------------------------------------------------------
\appendix % Cue to tell LaTeX that the following "chapters" are Appendices
% Include the appendices of the thesis as separate files from the Appendices folder
% Uncomment the lines as you write the Appendices
\include{Appendices/AppendixA}
%\include{Appendices/AppendixB}
%\include{Appendices/AppendixC}
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
\printbibliography[heading=bibintoc]
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
% ACKNOWLEDGEMENTS
%----------------------------------------------------------------------------------------
% Remove this page if you do not want to add any acknowledgements
\begin{acknowledgements}
\addchaptertocentry{\acknowledgementname} % Add the acknowledgements to the table of contents
The acknowledgments and the people to thank go here, don't forget to include your project advisor\ldots
\end{acknowledgements}
\end{document}