Assessment of Cardiovascular Biomarkers Derived from Peripheral Pulse Waveforms Using Computational Blood Flow Modelling

Open as TemplateView PDF

Autor

sally epstein

Last Updated

hace 8 años

License

Creative Commons CC BY 4.0

Resumen

The aim of this thesis is to investigate the ability of cardiovascular biomarkers calculated from peripheral pulse waveforms to estimate central properties of the cardiovascular system (e.g. aortic stiffness) using nonlinear one-dimensional (1-D) modelling of pulse wave propagation in the arterial network. To test these biomarkers, I have produced novel 1-D models of pulse wave propagation under normal and pathological conditions. In the first part of my thesis, I extended the modelling capabilities of the existing 1-D/0-D code to represent arterial blood flow under diabetes, hypertension, and combined diabetes and hypertension. Cardiac and vascular parameters of the 1-D model were tailored to best match data available in the literature to produce generalised hypertensive, diabetic, and combined diabetic and hypertensive population models. Using these models, I have shown that the pulse waveform at the finger is strongly affected by the aortic flow wave and the muscular artery stiffness and diameter. Furthermore the peak to peak time measured from the pulse waveform at the finger can identify hypertensive from diabetic patients.

In the second part, I developed a new methodology for optimising the number of arterial segments in 1-D modelling required to simulate precisely the blood pressure and flow waveforms at an arbitrary arterial location. This is achieved by systematically lumping peripheral 1-D model branches into 0-D models that preserve the net resistance and total compliance of the original model. The methodology is important to simplify the computational domain while maintaining the precision of the numerical predictions — an important step to translate 1-D modelling to the clinic.

This thesis provides novel computational tools of blood flow modelling and waveform analysis for the design, development and testing of pulse wave biomarkers. These tools may help bridge the gap between clinical and computational approaches.

Tags

University Theses

Find More Artículos

Assessment of Cardiovascular Biomarkers Derived from Peripheral Pulse Waveforms Using Computational Blood Flow Modelling

%input macros (i.e. write your own macros file called MacroFile1.tex)
%\include{Macros/MacroFile1}

\documentclass[oneside,12pt]{Classes/CUEDthesisPSnPDF}




\title{Assessment of Cardiovascular Biomarkers Derived from Peripheral Pulse Waveforms Using Computational Blood Flow Modelling\\[1ex]}
%Assessment of Cardiovascular Biomarkers Derived from Peripheral Pulse Waveforms Using Computational Blood Flow Modelling

%Assessment of Cardiovascular Biomarkers Using Computational Blood Flow Modelling at the Digital Volume Pulse

  \author{Sally Epstein}
  \collegeordept{Department of Biomedical Engineering}
  \university{King's College London}
% insert below the file name that contains the crest in-place of 'UnivShield'
  \crest{}

%
\degree{Doctor of Philosophy}
\degreedate{2016}

% turn of those nasty overfull and underfull hboxes
\hbadness=10000
\hfuzz=50pt

% Put all the style files you want in the directory StyleFiles and usepackage like this:
\usepackage{StyleFiles/watermark}
\usepackage{eurosym}
\usepackage{tikz}
\usepackage{float}
\usepackage{enumerate}
\usepackage{authblk}
 \usepackage{graphicx}
\usepackage{amssymb}
\usepackage{amsthm}
\usepackage{amsmath}
\usepackage[titletoc,title]{appendix}
\newtheorem{theorem}{Theorem}
\newtheorem{remark}{Remark}
\usepackage{lineno}
\usepackage{afterpage}
\usepackage{color}
%\usepackage[table]{xcolor}
\usepackage{changepage}
\usepackage{fullpage}
\usepackage{lscape}
\usepackage{overpic}
\usepackage{caption}
\usepackage{bm}
\usepackage{multirow}
\usepackage{changepage}
\usepackage[numbers]{natbib}
\usepackage[capitalise]{cleveref}
\usepackage{geometry}


\newcommand{\co}[1]{\textcolor{black}{{#1}}}
\newcommand{\hl}[1]{\textcolor{black}{{#1}}}

\newcommand*\rot{\rotatebox{65}}
\newcommand{\zero}{\mbox{0-D}} 
\newcommand{\one}{\mbox{1-D}} 
\newcommand{\three}{\mbox{3-D}} 
\newcommand{\viv}{{\it in vivo}} 
\newcommand{\Viv}{{\it In vivo}}
\newcommand{\vivp}{({\it in vivo}) }
\newcommand{\vit}{{\it in vitro}} 
\newcommand{\vitp}{({\it in vitro}) }
\newcommand{\et}{{\it et al.} }
\newcommand{\eg}{{\it e.g.} } 
\newcommand{\ie}{{\it i.e.} } 
\newcommand{\young}{{\it young} } 
\newcommand{\old}{{\it old} }
\newcommand{\normal}{{\it normal} } 
\newcommand{\hyper}{{\it hypertensive} } 
\DeclareRobustCommand\mytikzdot{\tikz \fill[black] (1ex,1ex) circle (0.8ex);}
\DeclareRobustCommand\mytikzsquare{\tikz \draw (0,0) -- (0.25,0) -- (0.25,0.25) -- (0,0.25) -- (0,0);}

\usepackage{floatpag}
\floatpagestyle{empty}


% Comment out the next line to get single spacing
%\onehalfspacing
\doublespacing
\begin{document}

%\language{english}

% A page with the abstract on including title and author etc may be
% required to be handed in separately. If this is not so, then comment
% the below 3 lines (between '\begin{abstractseparte}' and 
% 'end{abstractseparate}'), normally like a declaration ... needs some more
% work, mind as environment abstracts creates a new page!
% \begin{abstractseparate}
%   \input{Abstract/abstract}
% \end{abstractseparate}




% Using the watermark package which is in StyleFiles/
% and to remove DRAFT COPY ONLY appearing on the top of all pages comment out below line
%\watermark{DRAFT COPY ONLY}


\maketitle

%set the number of sectioning levels that get number and appear in the contents
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}

\frontmatter % book mode only
\pagenumbering{roman}

\include{Acknowledgement/acknowledgement}
\include{Publication/publication}
\include{Abstract/abstract}

\tableofcontents
\listoffigures
\printnomenclature  %% Print the nomenclature
\addcontentsline{toc}{chapter}{Nomenclature}

\mainmatter % book mode only
\include{Introduction/introduction}
\include{Chapter1/chapter1}
\include{Chapter2/chapter2}
\include{Chapter4/chapter4}
\include{Chapter3/chapter3}

%\include{Chapter5/chapter5}

\include{Conclusions/conclusions}

\backmatter % book mode only
\appendix
%\include{Appendix1/appendix1}
%\include{Appendix2/appendix2}

%\bibliographystyle{plainnat}
%\bibliographystyle{Classes/CUEDbiblio}
\bibliographystyle{Classes/jmb}
%\bibliographystyle{Classes/jmb} % bibliography style
\renewcommand{\bibname}{References} % changes default name Bibliography to References
\bibliography{References/Mendeley} % References file

\end{document}