Skip to content

Part 1 | Part 2 | Part 3 | Part 4 | Part 5

Author: Josh Cassidy (August 2013)

This five-part series of articles uses a combination of video and textual descriptions to teach the basics of writing a thesis using LaTeX. These tutorials were first published on the original ShareLateX blog site during August 2013; consequently, today's editor interface (Overleaf) has changed considerably due to the development of ShareLaTeX and the subsequent merger of ShareLaTeX and Overleaf. However, much of the content is still relevant and teaches you some basic LaTeX—skills and expertise that will apply across all platforms.

Your thesis could be the longest and most complicated document you'll ever write, which is why it's such a good idea to use LaTeX instead of a common word processor. LaTeX makes tasks that are difficult and awkward in word processors, far simpler.

When writing something like a thesis its worth splitting up the document into multiple .tex files. It's also wise to organise the project using folders; therefore, we'll create two new folders, one for all the images used in the project and one for all the .tex files making up the main body of the thesis.

Files a.png

The preamble

In this example, the main.tex file is the root document and is the .tex file that will draw the whole document together. The first thing we need to choose is a document class. The article class isn't designed for writing long documents (such as a thesis) so we'll choose the report class, but we could also choose the book class.

We can also change the font size by adding square brackets into the \documentclass command and specifying the size—we'll choose 12pt. Let's also prepare the document for images by loading the graphicx package. We'll also need to tell LaTeX where to look for the images using the \graphicspath command, as we're storing them in a separate folder.

The start of our preamble now looks like this:

\documentclass[12pt]{report}
\usepackage[utf8]{inputenc}
\usepackage{graphicx}
\graphicspath{ {images/} }

Now we can finish off the preamble by filling in the title, author and date information. To create the simplest title page we can add the thesis title, institution name and institution logo all into the \title command; for example:

\title{
{Thesis Title}\\
{\large Institution Name}\\
{\includegraphics{university.jpg}}
}
\author{Author Name}
\date{Day Month Year}

This isn't the best way to alter the title page so we'll look at more elaborate ways of customising title pages later on in the series, but this will suffice for now.

This is what the \maketitle command now produces for us:

Title.png

The frontmatter

After the title page we need to add in an abstract, dedication, declaration and acknowledgements section. We can add each of these in on separate pages using unnumbered chapters. To do this we use the \chapter command and add an asterisk. After these sections we'll add a table of contents using the \tableofcontents command:

\chapter*{Abstract}
Abstract goes here

\chapter*{Dedication}
To mum and dad

\chapter*{Declaration}
I declare that..

\chapter*{Acknowledgements}
I want to thank...

\tableofcontents

The main body

Now for the main body of the document. In this example we will add-in five chapters, one of which will be an introduction and another will be a conclusion. However, instead of just composing these chapters in the main .tex file, we'll create a separate .tex file for each chapter in the chapters folder. We can then fill in these chapters with text remembering to split them up into sections and subsections.

Thesisfiles.png

Then to add these chapters into the document, we use the \input command in the root document. Remember to add in chapters/ before the file name so that LaTeX knows where to find it.

\chapter{Introduction}
\input{chapters/introduction}

\chapter{Chapter Two Title}
\input{chapters/chapter02}

\chapter{Chapter Three Title}
\input{chapters/chapter03}

\chapter{Chapter Four Title}
\input{chapters/chapter04}

\chapter{Conclusion}
\input{chapters/conclusion}

The endmatter

We will now add in an appendix at the end of the document. To do this we use the \appendix command to tell LaTeX that what follows are appendices. Again We'll write the appendix in a separate file and then input it.

\appendix
\chapter{Appendix Title}
\input{chapters/appendix}

If we now compile the document, all our chapters will be added to the document and the table of contents will be automatically generated.

Thesiscontents.png Thesischapter.png

Now we have a basic structure for a thesis set up. In the next post I will show you how to change the page layout and add headers.

All articles in this series

  • Part 1: Basic Structure;
  • Part 2: Page Layout;
  • Part 3: Figures, Subfigures and Tables;
  • Part 4: Bibliographies with BibLaTeX;
  • Part 5: Customising Your Title Page and Abstract.
  • Overleaf guides

    LaTeX Basics

    Mathematics

    Figures and tables

    References and Citations

    Languages

    Document structure

    Formatting

    Fonts

    Presentations

    Commands

    Field specific

    Class files

    Advanced TeX/LaTeX